6.jpg
7.jpg
8.jpg
9.jpg
5

Tipper-characterizing features

The Material

The material used has only a very limited influence on the sound. But it has quite an influence on how the tipper feels and how comfortable it is when you´re playing, and of course what it looks like.

The most suitable woods are:
Ebony, macassar, snakewood, cocobolo, pink ivory, beech, maple, ash, oak, bamboo, grenadilla, purple heart, coconut, walnut, yew, amaranth, and more.

Other materials that can be used are:
Carbon, aluminium, Plexiglas, copper, fibres and bristles, leather, wool, textiles, antlers, ivory, horn, and more.

As you can see, there is practically no limit to the choice of materials.
Based on many years of experience, however, I have come to specialize in macassar, ebony and snakewood.

The shape of the tipper and its grip

Much the same applies to the tipper´s shape as to the material used:
it has little influence on the sound, but it´s important to comfort and feel when you´re playing.

The shape of the tipper has undergone major changes over the past few years. Whereas a few years ago, most players used short, thick, heavy tippers, some of which even had weights built into them, nowadays there is a preference for long, slim, very well-balanced tippers.

But whichever shape you prefer, do talk to me. There´s hardly anything that can´t be done!

The head of the tipper
This is the feature that has the greatest influence on the sound!

ScharfeProfil 300

 Sharp-edged profile - "Trumpet Head"

  • Delivers a sharp attack to a small impact surface.
  • Stimulates many natural vibrations in the drumhead, as there isn´t much
    chance of hitting an inert line
  • But: slow frequencies are "cut off".
  • Sound is clear, but may come across as cold and "tinny".
GroßeRundung 300

 Large round head

  • Delivers less attack to a larger impact surface - increases the chances of hitting an inert line and stimulates less natural vibrations.
  • Mainly excites slow frequencies (due to longer contact with the drum-head). But: rapid frequencies hardly have a chance.
  • Sound is soft and warm, but may come across as „mushy".
Drophead 300

 "Tear Drop"

  • A relatively small head with a relatively large impact surface.
  • Delivers a good deal of attack, with the benefit of striking a larger area than, for instance, the "trumpet head".
  • Its lightweight form is good for fast playing.
  • Sound is "radiant" with a good proportion of low frequencies.
Ellipsoid2 300

 Ellipsoid

  • A thin tipper head with a relatively large impact surface.
  • Has the same advantages as the "tear drop", but brings more weight to bear. This increases the proportion of low frequencies excited.
  • Hard, rigid woods such as snakewood, ebony and macassar make even very thin tippers highly resilient.
  • Sound is "radiant" with a large proportion of low frequencies.
HR3BambooHeadBig 300


 Hot rods

This design distributes the impact energy over a number of “small tippers” (dowels).

  • Several small impact surfaces hit the drumhead simultaneously:
    • Stimulating many natural frequencies
    • Delivering more attack per point of impact than a single tipper with the same impact surface (in other words, you cover the same impact area, but spread over several points, meaning you need less contact with the skin and less playing effort
    • Achieving a forceful effect, as the impact is reinforced by the dowels that follow.
  • The tipper’s inherent noise is dominant!
  • Sound: "fuller, warmer, more powerful, more tonal" with many active natural frequencies.
NEF1Head 300

 Split Tippers

  • The tipper’s inherent noise is dominant (the click is louder than the skin attack sound).
  • Overall sound depends heavily on the shape of the tipper head.
NEF3HeadBig 300

 Brush/Bristle Tippers

  • There is a natural "swish" sound, but the skin attack sound is more dominant.
  • The volume of the "swish" sound depends on the type of bristles and on how much the bristles are spread apart. The overall sound depends on the shape of the tipper head as well as on the bristles.
  • Special feature: natural tipper sound AND skin attack sound!

NEF2Head 300

 Special Mix: Hi-Hat

  • This tipper has a characteristic sound (a click), but the skin attack sound can be heard clearly at the same time.
  • This model can be regarded as a cross between a split tipper and a hot rod.
  • The overall sound is very well-defined and powerful, without too much "clickery-clack"

Well, that´s about it! You´ll find a few examples of custom-made tippers on the "Gallery" page.

If you have any further questions, just send me an e-mail! I´ll do my ut-most to give you the best advice I can.

Enjoy devising your own tipper design!